page_head_gb

products

PVC resin SG5 for pipe prouction

short description:

PVC resin, the physical appearance is white powder, non-toxic, odorless. Relative density 1.35-1.46. It is thermoplastic, insoluble in water, gasoline and ethanol, expandable or soluble in ether, ketone, fatty chlorohy-drocarbons or aromatic hydrocarbons with strong anti–corrosiveness, and good dieletric property.


Product Detail

Product Tags

PVC resin SG5 for pipe prouction,
how to select PVC resin for pipe production, PVC SG-5, PVC SG5 resin,
PVC resin can be processed into various plastic products. It can be divided into soft and hard products according to its application. It is mainly used to produce transparent sheets, pipe fittings, gold cards, blood transfusion equipment, soft and hard tubes, plates, doors and windows. Profiles, films, electrical insulation materials, cable jackets, blood transfusions, etc.

pvc-resin-sg5-k65-6747368337283

Application

Piping, hard transparent plate. Film and sheeting, photograph records. PVC fibers, plastics blowing, electric insulating materials:

1) Construction material: Piping, sheeting, windows and door.

2) Packing material

3) Electronical material: Cable, wire, tape, bolt

4) Furniture: Decorate material

5) Other: Car material, medical appliance

6) Transportation and storage

PVC Application

 

Package

25kg kraft paper bags lined with PP-woven bags or1000kg jambo bags 17 tons/20GP, 26 tons/40GP

Shipping & Factory

0f74bc26c31738296721e68e32b61b8f

Type

SG-5 resin with low degree of polymerization should be selected for hard tube production. The higher degree of polymerization, the better physical and mechanical properties and heat resistance. However, the poor fluidity of resin brings certain difficulties to processing, so SG-5 resin with viscosity of (1.7~1.8) ×10-3Pa•s is generally selected.

Hard pipe is generally used as lead stabilizer, which has good thermal stability and is commonly used as tribasic lead, but it has poor lubricity and is usually used with lead and barium soap with good lubricity.

The selection and use of lubricants is very important for the processing of hard tubes. It is necessary to consider both internal lubrication to reduce the intermolecular force, so that the melt viscosity decreases and is favorable for forming, and external lubrication to prevent the melt from sticking to the hot metal, so that the surface of the products is bright.

Metal soap is generally used for internal lubrication, and low melting point wax is used for external lubrication.

Calcium carbonate and barium (barite powder) are mainly used as fillers. Calcium carbonate makes the surface performance of the pipe good, while barium can improve the formability and make the pipe easy to be shaped, which can reduce the cost. However, excessive dosage will affect the performance of the pipe, so it is better to add no or less filler to pressure pipe and corrosion resistant pipe.


  • Previous:
  • Next: