products

Low density polyethylene for blow-molded film,
LDPE film grade, ldpe for film production,

Low-density polyethylene (LDPE) is a synthetic resin using a high pressure process via free radical polymerization of ethylene and is therefore also called “high-pressure polyethylene”. Since its molecular chain has many long and short branches, LDPE is less crystalline than high-density polyethylene (HDPE) and its density is lower. It features light, flexible, good freezing resistance and impact resistance. LDPE is chemically stable. It has good resistance to acids (except strongly oxidizing acids), alkali, salt, excellent electrical insulation properties. Its vapor penetration rate is low. LDPE has high fluidity and good processability. It is suitable for being used in all types of thermoplastic processing processes, such as injection molding, extrusion molding, blow molding, rotomolding, coating, foaming, thermoforming, hot-jet welding and thermal welding

Application

LDPE is principally used for making films. It is widely used in the production of agricultural film (mulching film and shed film), packaging film (for use in packing candies, vegetables and frozen food), blown film for packaging liquid (for use in packaging milk, soy sauce, juice, bean curds and soy milk), heavy-duty packaging bags, shrinkage packaging film, elastic film, lining film, buildinguse film, general-purpose industrial packaging film and food bags.

LDPE is also widely used in the production of wire & cable insulation sheath. Cross-linked LDPE is the main material used in the insulation layer of high-voltage cables.

LDPE is also used in the production of injection-molded products (such as artificial flowers, medical instruments, medicine and food packaging material) and extrusion-molded tubes, plates, wire & cable coatings and profiled plastic products.

LDPE is also used for making blow-molded hollow products such as containers for holding food, medicine, cosmetics and chemical products, and tanks.

Package, Storage and Transportation

The choice of polyethylene blow-molded film material

1. The selected raw materials should be blown film grade polyethylene resin particles, containing appropriate amount of smoothing agent,

Ensure the opening of the film.

2 resin particle melt index (MI) can not be too large, melt index (MI) is too large, then melt resin

The viscosity is too small, the processing range is narrow, the processing conditions are difficult to control, the film forming property of the resin is poor, not easy

Processing into film; In addition, melt index (MI) is too large, polymer relative molecular weight distribution is too narrow, thin film

Is poor in strength. Therefore, a smaller melt index (MI) and a wider relative molecular weight distribution should be selected

It can not only meet the performance requirements of the film, but also ensure the processing characteristics of the resin.

Blow molded polyethylene film generally uses the melt index (MI) in the range of 2 ~ 6g/10min polyethylene

The raw materials.