Factory Cheap Hot PP SP179 - PP EPS30R Injection molding grade-Impact copolymer – Junhai
Factory Cheap Hot PP SP179 - PP EPS30R Injection molding grade-Impact copolymer – Junhai Detail:
Polypropylene resin is a kind of crystalline polymer with regular structure. The granule is natural color, cylindrical granule, without mechanical impurities. Polypropylene has low relative density (0.90g/cm3-0.91g/cm3), good transparency and surface gloss, excellent mechanical properties and heat resistance, softening point is higher than high-density polyethylene, continuous use temperature up to 120 degrees Celsius, and excellent electrical insulation performance and chemical stability. After copolymerization with ethylene, mixed with rubber, or reinforced with glass fiber, mineral filling, if chemical additives, can obviously improve its performance, one to adapt to the special requirements of different fields. Polypropylene can be widely used in blow molding, injection molding, extrusion, coating, cable and wire sheath, extrusion monofilament, narrow band, film, fiber, etc., throughout the industry, agriculture and daily necessities in all aspects.
Virgin PP Granules EPS30R
| Item | Unit | Test Result |
| Melt Flow Rate (MFR) | g/10 min | 1.0-2.0 |
| Tensile Yield Strength | Mpa | ≥24.0 |
| Cleanliness, color | per/kg | ≤15 |
| Powder ash | % | ≤ 0.03 |
| Notched Izodimpact Strength | -20℃， KJ/m2 | 4 |
| Flexural Modulus | MPa | 950 |
Application
PP impact copolymer is widely used in the production of industrial products, such as dashboard, auto interior decorations, auto bumpers . It can also be used to make household articles, such as bottle caps, cookware, furniture, toys, toolkits, travel cases, bags and various packaging containers.
Packing and transportation
Product detail pictures:
Related Product Guide:
Bear "Customer first, High quality first" in mind, we perform closely with our consumers and provide them with efficient and experienced services for Factory Cheap Hot PP SP179 - PP EPS30R Injection molding grade-Impact copolymer – Junhai , The product will supply to all over the world, such as: Egypt, Indonesia, Cyprus, Our Company policy is "quality first, to be better and stronger, sustainable development" . Our pursuit goals is "for society, customers, employees, partners and enterprises to seek reasonable benefit". We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.
By Rebecca from Uruguay - 2018.02.21 12:14
The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
By Lauren from Niger - 2018.09.12 17:18
