100% Original Factory Thermoplastic Resin – Polyvinyl chloride resin SG-7 – Junhai
100% Original Factory Thermoplastic Resin – Polyvinyl chloride resin SG-7 – Junhai Detail:
Features thermo plasticity, being insoluble into water, gasoline and alcohol, swelled or dissolved into ether, ketone, chlorinated aliphatic hydrocarbons, and aromatic hydrocarbon, high resistance to corrosion, and good dielectric property.
Specification
Type |
SG3 |
SG4 |
SG5 |
SG6 |
SG7 |
SG8 |
K value |
72-71 |
70-69 |
68-66 |
65-63 |
62-60 |
59-55 |
Viscosity, ml/g |
135-127 |
126-119 |
118-107 |
106-96 |
95-87 |
86-73 |
Average polymerization |
1350-1250 |
1250-1150 |
1100-1000 |
950-850 |
950-850 |
750-650 |
Number of impurity particle max |
30 |
30 |
30 |
30 |
40 |
40 |
Volatiles content % max |
0.4 |
0.4 |
0.4 |
0.4 |
0.4 |
0.4 |
Appearing density g/ml min |
0.42 |
0.42 |
0.42 |
0.45 |
0.45 |
0.45 |
Residual after sieve 0.25mm mesh max |
2 |
2 |
2 |
2 |
2 |
2 |
0.063mm min |
90 |
90 |
90 |
90 |
90 |
90 |
Number of grain/10000px2 max |
40 |
40 |
40 |
40 |
40 |
40 |
Plasticizer absorbency value of 100g resin |
25 |
22 |
19 |
16 |
14 |
14 |
Whiteness % min |
74 |
74 |
74 |
74 |
70 |
70 |
Residual chlorethylenecontent mg/kg max |
5 |
5 |
5 |
5 |
5 |
5 |
Ethylidene chloride mg/kg max |
150 |
150 |
150 |
150 |
150 |
150 |
Applications
*SG-1is used in producing high-grade electrical insulating material
*SG-2is used in producing electrical insulating material, common soft products andfilm
*SG-3 is used in producing electrical insulatingmaterials, agricultural film, daily-use plastic products,such
as Films, raincoat, industry packing,artificial leather, hose and shoe-making material, etc.
*SG-4 is used in producing membranelle for industrial andcivil use, tube and pipes
*SG-5 is used in producing transparent products sectionbar, hard tube and decorative materials,such
as Rigid plate, gramophone record, valueand welding rod, PVC pipes, PVC windows, doors ,etc
*SG-6 is used in producing clear foil, hard board andwelding rod
*SG-7, SG-8 is used in producing clear foil, hardinjection molding.Good hardness and high strength,mainlyused for tubes and pipes
Packaging
In 25kg kraft bag or 1100kg jumbo bag.
17MT/20′FCL
Product detail pictures:
Related Product Guide:
To continually enhance the management technique by virtue of your rule of "sincerely, great faith and high-quality are the base of company development", we widely absorb the essence of similar merchandise internationally, and continuously build new merchandise to meet the demands of customers for 100% Original Factory Thermoplastic Resin – Polyvinyl chloride resin SG-7 – Junhai , The product will supply to all over the world, such as: Jamaica, Jersey, Puerto Rico, We have been making our products for more than 20 years . Mainly do wholesale , so we have the most competitive price , but highest quality. For the past years , we got very good feedbacks , not only because we provide good products , but also because of our good after-sale service . We are here waiting for you for your inquiry.
By Rebecca from Bangkok - 2018.12.11 11:26
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Maggie from Romania - 2018.08.12 12:27